WOCA Active Stain 4, 2.5L

per bottle, Inc. VAT
per bottle, Ex. VAT
 CODE: 500625A

Product Variations


WOCA Active Stain 4, 2.5L is water-based and developed to produce grey special effect colours in oak wood and create a very unique colour. The product is non-corrosive. Active Stain reacts with the tannic acid in the oak. The colour may vary after application depending on the concentration of tannin in the wood.

  • The wood must be clean, dry and free from dirt and grease.
    Apply an even coat of the stain with a brush or a short-haired paint roller lengthwise along the grain.
  • Apply at least 1 litre of stain to 10 m2 of wood.
    Clean tools in water after use.
  • Leave the stained surface to dry for approx. 24 hours at 20°C (the wood must be completely dry).
  • De-nib standing fibres with a fine abrasive polishing pad and vacuum clean the floor before the final basic treatment. Finish the wood surface with WOCA oil, Colour Oil, Oil Lacquer or soap.

Storage: Store safely, out of the reach of children. Do not expose to heat (e.g. sunlight). Store frost-free.

Disposal: Empty containers and residues to be disposed of according to local regulations.

Declaration: Water, dying agents.

VOC: This product contains a maximum of 50 g VOC/Litre. The limit value is 140 g VOC/Litre (cat. A/i).

Consumption: 8-10 m2/l.

You can choose between the other types of stain also.


Wood Dye Specification
Pack Size 2.5 L
Coverage 20-25 sqm
Drying Time Approx. 24 hours
Code 500625A

Guides & Downloads