Combymat Heating Mat is earth shielded system designed to be used beneath quality floating laminate and engineered board floors without the requirement for covering with levelling compounds. With the addition of Overlay Boards, this versatile system can be also be used beneath carpet, vinyl, linoleum and bonded board floor coverings, without any wet trade.
The mats can provide sole source heating in reasonably well-insulated rooms, and floor warming in other situations.
With more than 20 years' experience of the UK underfloor heating market and a wealth of knowledge on Scandinavian ice and snow melting systems, you can rely on Heat Mat to understand your needs and requirements.
The mats are quick and simple to install and can be 'cut-and-turned' like a conventional under tile heating mat. For particularly complicated areas the cable can be stripped from the mat and laid as a loose cable. The aluminium tape must be used to cover any loose cables and also to secure the mats. When used with Heat Mat's intelligent thermostats they provide a fast-reacting and cost-effective heating system.
Combymats are almost 100% efficient at converting electricity into heat and they can easily be powered by locally generated electricity from either photovoltaic or wind power sources.
- Designed to provide sole source heating in most rooms
- Dual conductor system - only one power lead per heating mat, enabling simple installation
- Once installed the system has a functional earth shield
- Aluminium heat dissipation layer designed to spread the heat out from the cable
- No requirement to cover the mats with an additional levelling compound or moisture barrier, saving build height and costs
- Must be installed with 6 mm foam insulation boards. The 6 mm insulation that forms part of the system provides acoustic deadening as well as thermal insulation
- Combymats are not suitable for use in wet areas such as bathrooms and wetrooms
- Supplied with a Lifetime Warranty
- A large range of standard sizes which can be mixed and matched to ensure a perfect fit
| Underfloor Heating System |
| Length | 5 m |
| Width | 0.5 m |
| Wattage | 375 W |
| Resistance (Ohms) -5/+10% | 151 |
| Size in Square Meter | 2.5 sq/m |
| Voltage | 230 V /- 10% |
| Cable Flexibility | Minimum bend radius 25 mm |
| Thermal Conductor | Fluropolymer coated resistance wires |
| Earth Shield | Aluminium Foil |
| Code | CBM-150-0250 |