Bona Filers and Mastics

Bona Fillers

When you are renovating a floor, good preparation is crucial for the end result. Bona products can add that final touch, which will make you very satisfied with your floors.

Bona Gap Master

Bona Gap Master is a silicone-free mastic designed to fill gaps between parquet blocks, around skirting boards and door thresholds. This Bona filler is based on polyurethane and acrylate and contains no solvents. Bona Gap Master is odourless and can be used with all Bona parquet finishes.

The main advantages of Bona Gap Master are:

High degree of flexibility
Can be sanded and overcoated
Solvent free
Silicone free
Available in 14 colours

Bona Mix&Fill

Waterborne Bona Mix&Fill allows the specification of a completely waterborne installation. This joint Bona filler is designed to be mixed to a suitable consistency with fine sanding dust from the floor being treated. Bona Mix&Fill is used to fill joints up to 2mm in width and other minor defects in wooden floors

The main advantages of Bona Mix&Fill are:

Works with all Bona finishing and oil systems
Free of solvents
No unpleasant smell
Fills the joints, but doesn’t slump
Waterborne, but anti-corrosive
Dries quickly
Easy to sand
Always the right colour of the joint

Bona Mix&Fill Plus

The Bona Mix&Fill Plus is a waterborne gap filler with a filling capacity equal to solvent-based alternatives. Its high filling capacity, short drying time and good abrasion properties make it an exceptionally reliable Bona product. Under normal conditions, it only needs to be applied once, which means that you save both time, money and effort. Bona Mix&Fill Plus also offers the benefit of a very nice and natural colouration both with oil and finish. Moreover, add to this the fact that you can work without unpleasant smells and hazardous fumes.

Bona’s new filler Mix&Fill Plus has the following advantages:

High filling capability
Good environmental profile
Non-offensive smell
Quick-drying
Good sanding ability
Anti-corrosive
For gaps up to 3 mm wide