Fiddes Hardwax-Oil, Whiskey Finish, 1L

per can, Inc. VAT
per can, Ex. VAT

Buy More & Save!

Buy 2+ can for £28.49 per can, Ex. VAT
Buy 2+ can for £34.19 per can, Inc VAT

Product Variations


Trade prices & discounts are available for this product in store only. Order by phone. This product is available with next Day Delivery, excluding Sundays, coverage includes London within M25.

A blend of natural oils & waxes offering exceptional durability & resistance for internal natural wood flooring, kitchen worktops (wood) and areas subjected to a high degree of wear.

Fiddes Hardwax-Oil, Whiskey Finish, 1L produces a quick-drying, natural water repellent, tread-fast finish that will not peel or flake. To maintain/renovate, simply wash, buff or re-apply, following the guidelines below.

Suitable for application onto children’s toys – EN 71-Toy Safety Certification

Resistant to liquids: Tested in accordance with BS 3900 G5

Resistant to wear: Tested in accordance with BS3900 E15


Ensure all surfaces are clean, dry, and free from any previous finish. Sand the substrate with a fine 150-grade sanding paper or 150 grit sanding disk, removing all traces of dust.


Ensure all areas to be coated are extremely well ventilated during and after application. Always test on a small area prior to initial application. No primer required. Maximum 2 coats recommended. Apply at room temperature. Fiddes Hard Wax Oil is formulated for application directly and does not require thinning.

First Coat - Stir contents thoroughly before and during use, and apply in a warm, well-ventilated room. Apply THINLY using a good quality bristle or synthetic brush and lay EVENLY, following the direction of the grain. Remove any surplus material immediately with a cloth, carefully checking all areas for any excess application. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight.

Second Coat - Apply as the first coat, THINLY, allowing good ventilation. Leave to dry 4-6 hours in warm, dry well-ventilated conditions, or preferably overnight. Clean applicator with White Spirit. When the surface area is completely dry, a light buff will further enhance the sheen level.

  • Ensure all areas to be coated are extremely well ventilated during and after the application has occurred.
  • Always test on a small area prior to major application.
  • Certain dense or oily substrates may only require a single application and subsequently buffed to achieve the desired finish.
  • Longer drying periods may occur during application in cold, damp or humid conditions.
  • Always apply sparingly and remove any excess product thoroughly.

Re-Application: To renovate previous application of Fiddes Hard Wax Oil, lightly sand area with 150 grit sandpaper, and re-apply sparingly.

Coverage: A single application will cover approximately 20-24 square meters per litre, depending on the density of the substrate.

Packaging: 250ml - 1lt - 2.5lt - 25lt


Sealant & Lacquer Specification
Coverage 20 m2/1 L
Component Base One Component
Drying Time Approx. 12 hours
Application Tools Brush, Roller or Cloth
Pack Size 1 L
Colour Whiskey

Guides & Downloads

Related Products

  • General Purpose Masking Tape, 48 mm, 25 m

  • Value Brush, 2.5 inch (63 mm)

  • All Purpose Paint & Varnish Brush, 3 inch

  • Aluminium Telescopic Extension Pole

  • ProDec Screw-Fit Stick Roller Frame, 10 inch (250 mm)

  • ProDec Screw-Fit Cage Roller Frame, 9 inch, 225 mm

  • Bona Oiling Cloth

  • Bona Buffing Cleaning Pads, White, Pack of 5, 407 mm

  • ProDec Gloss Pile - Simulated Mohair Roller, 9 inch (225 mm)

  • Osmo Oil Floor Brush 220 mm

  • Osmo Oil Floor Decking Brush 150 mm